This product is built when ordered and can sometimes take several days or weeks to ship. Please contact us if you require an exact ship date.

A smaller version of our mazing POP Blaster!

This item requires an Air Compressor. Not included!

This product is built when ordered and can sometimes take several days or weeks to ship. Please contact us if you require an exact ship date.

Select if you will be using a different controller.

1x Trigger Input1x Solid State Output (12 or 24V only)Up to 1 Minute of AnimationNo Audio Features12V1A Power Supply Included.

View product

Features:• 2 trigger inputs• 2 solid-state outputs• Built-in WiFi• Remote configuration and monitoring• No onboard audio

View product

If you have your own trigger or don't need a trigger.

Triggers when invisible beam is broken.

View product

Triggers when invisible beam is broken.

View product

Button at the end of 15 foot cable activates prop controller when pushed.

View product

Motion sensor (PIR) triggers prop controllers when motion is detected.

View product

Motion sensor triggers prop controllers when motion is detected.

View product

Large 18" x 24" mat triggers prop when stepped on.

View product

Remotely trigger up to one device.

View product

An incredible amount of forceful air is released in a split second through the 3/4 inch port. The compact design of the Pop Blaster Mini allows it to fit in small spaces and be concealed easily.

Mounting ring provided at air exit point
Designed to mount to single or double sided haunted house wall panels or inside a box
This allows for a small 3/4in. hole where air blasts out of
You can also remove mounting ring and blast directly from the 3/4in. pipe
100psi (max.) constant air supply (compressor) required
Measures 17" tall