The shaft arm contains one mounting hole that is 5/16"
Sorry, we do not have that specification available.
The shaft has a tapered end with splines, the very end of the shaft is threaded to accept mounting nut. The shaft arm is compressed onto the tapered shaft with the provided mounting nut.
This motor works well for the Axworthy. We also have a kit here
Each motor can draw up to 3Amps so technically only one motor can be run from a 12V 5Amp power supply. If your application does not put much stress on the motor then you might be able to run 2 off of one power supply.
It can be mounted in any position.
Yes, the shaft is made of steel.
Yes, they work great from a 12V DC car or motorcycle type battery.
No, it does not come with a mounting bracket.
It depends on the load hooked up to them, but generally they can run that long with no problem.
It potentially can but we do not carry or have a source for pulleys that fit the motor.
Yes, the motor comes with the nut and shaft arm unattached.
That is not a specification that is easily answered because it depends on how the motor is used and powered. The rated torque is : 53 in-lb (6N.m) and stall torque is 177 in-lb (20N.m).
Yes. The 12v power supply will work with European 220v power.