Join Free or Sign in
Shopping Cart 0
$0.00

Wireless Trigger (4-Relay)

SKU
HB-1ABP
In stock
Remotely trigger up to FOUR devices.

As low as $29.99

Customize Wireless Trigger (4-Relay)
Your Customization
Wireless Trigger (4-Relay)
Wireless Trigger (4-Relay)

In stock

$29.99

Summary
    The module has four relays (7 amps max per) on screw down terminal blocks. PicoBoos, BooBoxs, lights, or any other device that can be triggered from a relay can now be activated wirelessly. Use with all FrightProps controllers and audio players or your own devices with trigger input. Package Includes:

    • 1 x Control Switch Board with four 7-amp relays on it
    • 1 x Remote Control with four buttons

    Requires a 12VDC Power Supply. If you are powering from another device (such as a PicoBoo) then you will not require one.

    Transmitter:

    • Channels: 4CH
    • Remote Control Distance: 100m / 300 ft
    • Encoding: Fixed code, soldering
    • Power Supply: 1 x 23A-12V battery
    • Size: 58 x 39 x 16mm
    Receiver:
    • Channels: 4 CH
    • Control Modes: Toggle / Momentary / Latched / Toggle+Momentary
    • Decode: Learning code
    • Required Power Supply: DC 12V (not included)
    • Relays: 10A / 120V AC, 20A /14V DC
    • Working Voltage Range of Relay: AC 110-240V or DC 0-28V
    • Board Size: 68 x 48 x 20mm
    • Static Current: <=6mA
    • Working Frequency: 315 MHz

        Please Note:

        • Actual antenna range will vary greatly depending on the installation and operating environment
    Write Your Own Review
    You're reviewing:Wireless Trigger (4-Relay)
    Your Rating
    Customer Questions
    With this wireless controller, do the buttons on transmitter act as off/on switch or momentary?

    The wireless unit is user configurable for momentary, latching, and signal interlock.

    • Momentary: The relay activates when the button is pressed and deactivates when released.
    • Latched: When button is pressed the relay stays on until the button is pressed again.
    • Signal Interlock: Flip flops between relays. For example: press A and relay A stays on even if A  is pressed again. Press B and then relay A turns off and B stays on. Then button B does  nothing until button A is pressed. And so on.

    Do the wireless triggers have to be "line of sight" to activate?

    The wireless triggers work the farthest when there are no obstructions. But they do work through walls and such, just not as far.

    Are these waterproof, can it be out in the rain?

    These are not waterproof and must be protected from all moisture.

    Does the wireless remote for the flash cracker use the same frequency as the four channel remote?

    They use the same frequency (315Mhz) and they will conflict with each other as they each use the same communication protocol.

    What kind of battery used in the remote and can it be replaced?

    The battery is a “23A” and is replaceable.

    There are currently no specific videos for this product. Visit our YouTube channel for many great videos.
    For assistance with this product visit the Support & Training Center or Contact Us