Join Free or Sign in
Shopping Cart 0

Power Injector for EscapeKeeper

In stock
Add this accessory to your controller to power servos or RGB pixels directly with your device!

As low as $19.99

Customize Power Injector for EscapeKeeper
Your Customization
Power Injector for EscapeKeeper

In stock


    This board will allow you to connect NeoPixels™ or an RC Servo to your 2018 EscapeKeeper.

    Power Injection

    Pixel strips and RC Servos can require a lot of power at a voltage lower than the EscapeKeeper can provide. This board, coupled with an external power supply, will sit between the EscapeKeeper and your servo or LEDs to provide this power.

    If you are using an LED strip, it must be of the WS2812B or SK6812 variety. These are commonly called NeoPixels™ by Adafruit.

    Power Supply

    This board requires a 5 or 6 volt power supply. Which voltage and current you choose depends on what you'll be driving. NeoPixels must always be driven at 5 volts. They take up to 60mA each when all three colors are on. Servos can be 5 or 6 volts depending on your requirements and the servo you choose. The current they require varies dramatically depending on the size of the servo and how much load it's under. See the list below for some rough estimates.

    Power Supply Examples:

    • Up to 30 NeoPixels - A 5 Volt 2 Amp power supply.
    • Up to 80 NeoPixels - A 5 Volt 5 Amp power supply.
    • Standard Servo - A 5 Volt 2 Amp power supply.
    • Large Servo - A 6 Volt 5 Amp power supply.

    DIN Rail Mountable

    The EscapeKeeper and its accessory boards are DIN rail mountable for easy installation.


    This accessory will only work the 2018 model EscapeKeeper as it requires the new AUX output. As shown in the image, you can see this output next to output 3 on the EscapeKeeper. It will not work with the EscapeKeeper JR or FlexMax.

    You may need to update your firmware to get the new Patch Panel puzzle mode. Your firmware must be at v2.1 or above. You can always get the latest firmware here.

    Write Your Own Review
    You're reviewing:Power Injector for EscapeKeeper
    Your Rating
    Customer Questions
    No Questions
    There are currently no specific videos for this product. Visit our YouTube channel for many great videos.
    For assistance with this product visit the Support & Training Center or Contact Us