Join Free or Sign in
Shopping Cart 0
$0.00

ServoTalk

SKU
HB-1AU4
In stock
The ServoTalk is a real-time servo and RGB NeoPixel controller. Connect an audio source and up to three servos and some NeoPixels and the ServoTalk will bring them to life.

From $99.99

To $109.97

Customize ServoTalk
Your Customization
PicoTalk -Servo Controller
ServoTalk

In stock

$99.99

Summary
    Includes 6VDC 2A power supply!
     

    Real-Time Mouth Control

    The ServoTalk listens carefully to the audio and moves the servo in sync to make the character look like it’s doing the talking. No programming or specially encoded audio track required, just keep vocals in one channel and sound effects and music in the other.

    Intelligent Random Movement

    The second and third servo outputs can be used to control the eyes and head turn of the character. The ServoTalk will occasionally move these servos when the character isn't talking to give it some life. When the character starts talking, it will increase the activity. The amount of movement is completely adjustable. If you prop doesn't have eyes or head-turn, program your own movements!

    Program your own Movements

    If you don't like or can't use the built-in random eye/head animation you can program your own. Record up to 64 movements on each servo. The ServoTalk will track the position, speed, and delay of each movement and play them back in a loop.

    RGB NeoPixel Eye Control

    The new ServoTalk can control RGB NeoPixels so you can select which color eyes you want. The brightness and behavior of the LEDs is adjustable. The LEDs can be set to throb to the character's voice, fade out after an adjustable amount of inactivity, or stay on all the time.

    Over-Voltage Protection

    The ServoTalk has your servo's back when it comes to voltage. If you connect a power supply greater than 8.5 volts the voltage will not reach your servos. Most servos will be damaged almost immediately if they are connected to 12 volts, so this feature can save a lot of money if someone makes a mistake and you have to replace all 3 servos.

    Servo Sleep

    If either servo hasn't moved for one second the ServoTalk will stop sending the position signal. This extends servo lifetime by allowing the servo to relax during times of inactivity. This option can be disabled if your setup requires the servos to be active at all times.

    Easy Setup

    The ServoTalk can be easily configured to suit your application. Simply turn the adjustment pot and tap the set button to adjust the following paramters:

    • High and low limits for each servo
    • Speed and sleep settings for each servo
    • RGB NeoPixel LED color and brightness
    • Audio sensitivity
    • Idle Timeout
    Write Your Own Review
    You're reviewing:ServoTalk
    Your Rating
    Customer Questions
    What type of LED's work with the PicoTalk?

    Any standard LEDs will work. The operating voltage of standard LEDs is usually around 1.2 volts. Anything from 1 to 2 volts will work fine. Which is almost every LED out there. They just can't be LED assemblies that already have integrated resistors, such as our nano spots, mini spotlight LEDs, etc.

    I just want the head to turn. Is the PicoTalk Three my only option to control the servo?

    You can select the 2 or 3 output version on the product page but the 3 version is the only one specifically made to turn the head. /controllers-electronics/frightideas-controllers/picoboo-controllers/picotalk-two-servo-controller.html

    2014 Talking Skulls

    PicoTalk 402-C Quick Program

    PicoTalk 402-C Full Program

    For assistance with this product visit the Support & Training Center or Contact Us