Join Free or Sign in
Shopping Cart 0

Vehicle Motion Detector

In stock
Our Vehicle Motion Detector is simple to use and great for hay rides!
Our Vehicle Motion Detector is a simple to use vehicle motion detection system that operates on the principle that any moving ferrous metal object will distort the Earth's magnetic field to some degree. The technology used to measure this distortion is one of the most reliable forms of outdoor detection available. The Vehicle Motion Detector will only sense moving iron or steel and will not be set off by people, animals, wind, etc. The sensor is best located next to the vehicle path or buried underground.

  • Includes: Sensor with 50 feet of cable.
  • Requires 9-41VDC or 6-29VAC) power (out controllers will supply this)
  • Can be used as Normally Open or Normally Closed


  • Range sensitivity: 12 ft. @ 5mph min. speed
  • Output on time: 0.5…6 seconds
  • Surge protection: Probe circuitry protected by surge suppressors
  • Relay output configuration: - 5-wire Form C (SPDT)
  • Relay contact rating: 1A @ 24VDC, 1A @ 120VAC
  • Power: 9…41VDC or 6…29VAC
  • Standby current: 0.250mA
  • Detection current: 12mA
  • Operating temperature: -40˚C…82˚C (-40˚F…180˚F) / 0…95% relative humidity
  • Probe housing material: PVC water-tight
  • Probe dimensions: (L x Dia.) 24” (610mm) x 1” (25mm)
  • Probe cable: 5-wire, direct burial

Use with all FrightProps controllers and audio players or your own devices that have trigger input.

Write Your Own Review
You're reviewing:Vehicle Motion Detector
Your Rating
Customer Questions
No Questions
There are currently no specific videos for this product. Visit our YouTube channel for many great videos.
For assistance with this product visit the Support & Training Center or Contact Us