• FaceBook
  • Twitter
  • Instagram
  • Pinterest
  • YouTube
  • Google+
  • Tumbler
  • Blog

Only 125
days until



SKU: 0975B
  • Create life-like movement of motors or lighting effects
  • Up to 60 Seconds of Animation
  • 1x 12V 2.5Amp Output
  • No Audio Features
  • Trigger Input
  • Can stop parking motors at the park position
  • Power Supply Sold Separately

In Stock

From: $49.99

To: $69.98

Price as configured: $0.00

* Required Fields

Price as configured: $0.00


The PicoVolt allows you to precisely control the speed and direction of a DC motor, or brightness of LED lights. Keep the motor at a constant speed, or create your own animation and have it loop or played on a trigger.

Operating Modes

In it’s simplest mode, the PicoVolt’s speed wheel can be used to precisely set the speed and direction of a DC motor or brightness of LED Lights. But the PicoVolt doesn't just do that, it allows you to program up to 60 seconds of animation, any speed, any direction. Just hold the record button while animating the motor using the speed wheel.

Trigger Input

The new trigger input allows the PicoVolt to be used for more than just looping animation. Connect the input to any standard sensor and the PicoVolt will play your animation back on command. Looping the animation for an ambient prop is still possible.

Our selection of triggers can be seen here.

Motor Parking

The new PicoVolt can read the park switch of many wiper motors to determine its home position. The PicoVolt can then bring your motor back to that position at the end of the animation. It can let it coast to a stop, or stop it instantly using the new brake option. This opens up new applications for the PicoVolt that were previously not possible due to motor drift. Make sure your motor has a park wire if you want to use this option.

LED Lighting Control

The PicoVolt also has an LED lighting mode that allows you to easily program any lighting effect. Loop the effect, or play it on a trigger.

Power Supply

The PicoVolt must be powered by a 12 volt DC power supply. The wattage you need depends on what you're controlling. Pretty much all motors will require the 60 watt power supply. Most LED setups will be fine with the 12 watt supply, however larger ones may need more. Add up the wattage of all your LED lights and make sure the power supply you choose has a wattage at least that high.


The PicoVolt has a write protection mechanism that helps prevent accidental or unwanted program changes.

Please Note
  • A power supply is not included. We suggest our 12vDC 5amp Regulated Power Supply.
  • The PicoVolt is not meant for extremely precise applications. All motors have some degree of "drift" and you may notice some variation in your program over time. This is normal.


Related Products

Product Faqs

Ask a Question

  • Is there a way to loop the program?
    Yes, you simply put a piece of wire into the trigger input.
  • Is it possible to trigger this controller with a wireless remote from Home Depot?
    NO! Motions sensors from the hardware store are 120V AC and will burn up the controller. Only 12VDC trigger devices must be used with the controllers.
  • Can the PicoVolt be used with any wiper motor?
    Yes, as long as the motor is 12V DC.
  • After the PicoBoo is triggered and running animation, will another trigger during the animation restart the animation?
    No, the program will run to completion.
  • My parking motor has two parking wires (black and yellow), which do I use with the PicoVolt controller?
    When using our parking motor with the PicoVolt use the yellow wire and ignore the black.
  • How do I make it continuously play without having to trigger it?
    Simply put a jumper (piece of wire) into the trigger input terminals and it will play the program continuously.
  • Can I run two high torque parking motors with this controller if I use a 12VDC 10 amp power supply?
    No, the PicoVolt can only handle up to 3 amps which is about as much as one of our prop motors requires.
  • is there a way to hook up a Linear Actuators to this?
    Yes, the PicoVolt supports Linear Actuators.
  • Can I run a PicoBoo from a battery?
    Yes, you can run them from a 12V battery. More information can be found here
  • Can you run solenoids from this?
    No, solenoids should never be connected to the PicoVolt.
  • Can I have the recorded program run and repeat indefinitely without needing to be triggered each time?