Sprite 4K Seamless Looping HD Triggerable Video Player

Looping play begins when power is applied. It plays most high definition file types including mpeg, H.264 and WMV9 from a SD memory card or USB drive. It can be used as an audio repeater playing MP3 or WAV files. It has a 2-way serial communications port at 3v3 or 5v TTL level to work with external control devices to play multiple files on command. The Sprite gives feedback reports every half second telling the file playing, and also reports the end of file mark. It has a single direct push-button input that can trigger on contacts or High or Low level change. There is no black space when looping or changing files. It has a 5V DC output to power a motion sensor or other small load.

Included with the Sprite

• 5V Power Supply
• RCA Video/Audio Cable
• Remote Control
• Trigger Input Adapter

You may require an HDMI cable (not included) if your TV or projector uses that type of video. SD memory card is required but not included unless ordered.

FEATURES:

• Full 4K video up to 4096 x 2160 at up to 60 fps
• Play digital files from SD memory card or USB drive
• Seamless play - There is no black space when looping or changing video files.
• Begins play when power is applied. No need to push buttons every time.
• Simple to use on-screen menu. No programming required.
• Use for a simple looping video, or a loop with additional triggered files.
• Play multiple files continuously in order or randomly when power is applied.
• Direct input for one pushbutton or a motion sensor.
• Add the Hydra Input / Output Expander for more inputs, outputs and DMX512 control.
• Small size and light weight - Measures 3.15 x 2.70 x 0.63 inches - Fits any space
• 5.1 surround sound by HDMI or Optical output with AV receiver / sound bar / decoder
• Energy efficient low power "Green" design. Only uses about 2.5 Watts of power.
• Built to last with long-life Panasonic capacitors, large heat-sink and aluminum case.

Serial Port for more advanced users

Take full control with the serial port

• Simple 1 byte commands to play files
• 5 Volt or 3 Volt levels
• Use with any microprocessor like Arduino, Basic Stamp, PIC, etc.
• TTL adaptor is available for ±12V RS232 devices. Crestron and AMX and etc.
• Feedback from the Sprite 4K reports the current file playing and the end of file.
• Control up to 200 files
• Multiple baud rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200, 921600, 1500000
• Transport commands: Pause, FF, FW, Next file, Previous file
• Audio commands: Mute, Volume Up, Volume down
• Plus even more commands!- See the manual for details