Scream Box

Comes pre-loaded with four scary sounds!

A powerful, 14-Watt speaker with a built-in motion sensor and MP3 player! Simply load any sound, or series of sounds, you want onto an SD card, put the SD card into the speaker and turn it on. You can also use a USB memory stick to upload your files into the internal memory.

When guests trigger the PIR the speaker will play your sound. Can be set to loop through a series of sounds or play the same sound every time.

There are two ways to load audio into the Scream Box:

• USB Memory Stick upload: If you are going to be using only a few small audio files you can put them on a USB memory stick and it will read them into the limited internal memory. You can then remove the USB stick.
• SD Memory Card: Place all audio files onto an SD card and insert into Scream Box. SD card must be left in Scream Box.

• Uses PIR technology for accurate motion sensing
• No tools or software needed!
• Will not "forget" program when powered down
• Storage medium: Built-in SPI Flash/ SD card ,
• Internal flash supports 5-30 minutes sound.
• Supports MP3 format files .
• Supports two modes: All loop one by one and single loop
• Built-in 14W power amplifier to ensure loud and clear sound.
• Comes with appropriate 24VDC 2.5A power supply.
• Measures: 7in. wide x 10in. high x 5in. deep