Join Free or Sign in
Shopping Cart 0

3 Channel DMX Solid State Decoder

In stock
Decode DMX signal into solid state outputs! Trigger any low voltage device with DMX!

As low as $24.99

Customize 3 Channel DMX Solid State Decoder
Your Customization
3 Channel DMX Solid State Decoder

In stock


    NOTE: We do not recommend activating solenoids with this unit without the use of a diode installed between the unit and the solenoid. Directly activating solenoids with this unit will damage the device.

    The solid state outputs directly supply voltage to connected devices when commanded via DMX. The voltage (12 or 24) you power the decoder with determines the voltage that will be sent to the solid state outputs. So if your devices require 12V then get a 12V power supply, or if they require 24V then get a 24V power supply. To determine the appropriate amperage of the power supply you will need to add up the requirements of each device that will be connected to the decoder and then an additional 300mA for decoder itself. Contact us if you need assistance.


    • Power Input: DC 12v-24V (max. 12AMP)
    • Output: 4AMP max per channel
    • Controller: DMX512
    Write Your Own Review
    You're reviewing:3 Channel DMX Solid State Decoder
    Your Rating
    Customer Questions
    No Questions
    There are currently no specific videos for this product. Visit our YouTube channel for many great videos.
    For assistance with this product visit the Support & Training Center or Contact Us