Join Free or Sign in
Shopping Cart 0

Instructables Monster-In-A-Box Halloween Prop Parts Kit

In stock
We saw this awesome Monster In A Box prop build by user Jarame on Instructables and thought it was so good we had to put together a parts kit for any other intrepid haunters who might want to give this a shot!

Requires CompressorThis item requires an Air Compressor. Not included!

As low as $722.58

Customize Instructables Monster-In-A-Box Halloween Prop Parts Kit
Your Customization
Instructables Monster-In-A-Box Halloween Prop Parts Kit

In stock


    100% of 100
    Check out Jarame's how-to guide on the Instructables site here:

    Part 1
    Part 2

    What's Included:

    All the electronics and pneumatics required to create the prop!

    What's Not Included:
    PVC pipe, bolts, wood and other decorative/hardware elements that can be easily found at your local home center.

    The kit does not come with instructions, but you can follow Jarame's guide on Instructables to make your own awesome animated Halloween prop!

    NOTE: We made some small changes to the parts used in the original document. Most of these are self explanatory. The only significant change was that rather than using a Male Branch T to split the air line to the two solenoid valves, we have included a Y Union.

    Full List of Everything That's Included:

    • 1x BooBox Flex with 8 Outputs
    • 1x PIR Motion Detector
    • 1x 4GB SD Card
    • 1x 12V 5A AC Adapter
    • 1x Double Acting Universal Mount Cylinder - 2" Stroke
    • 1x Double Acting Universal Mount Cylinder - 1.5" Stroke
    • 2x 12vDC 4 Way, 5 Port Solenoid Valves with 1/8" Ports
    • 2x 1/4" Flow Control Unions
    • 20x Feet of 1/4" Polyethylene Airline
    • 4x Sintered Bronze Mufflers
    • 6x 1/4" Male Connector Push-On Fittings
    • 1x Union Y (used to branch the single incoming air supply line into 2 lines, one for each solenoid)
    • 1x Quick Connect with Push-On for 1/4" Airline (used to connect the air supply line coming from compressor)
    • 4x 1/4" Male Swivel Elbow Push-On Fittings
    • 2x Cylinder Foot Brackets
    • 1x Cylinder Flange Mount
    • 2x Cylinder Rod Bumpers
    • 1x 12V Single Relay Board
    • 1x Set of Powered Speakers
    • 2x Green Nanospot Miniature Spot Lights
    Write Your Own Review
    You're reviewing:Instructables Monster-In-A-Box Halloween Prop Parts Kit
    Your Rating
    Customer Questions
    No Questions

    Jarame's Monster-In-A-Box Prop Completed

    For assistance with this product visit the Support & Training Center or Contact Us