The Tilt Kit is a compact overhead style tilt system for a standard size servo. While the tilt system doesn't increase the torque of the servo being used, it does greatly increase the rigidity and isolates the load from the servo so it can operate more smoothly and efficiently. The side opposing the servo output spline is supported using a 1/4" aluminum shaft running inside a 1/4" ball bearing so that the load gets dispersed evenly between the two sides. The base has the .770" hub pattern so that it can be attached to nearly any other component using 6-32 screws. The top of the tilt has various 1/4" thru holes so that a prop can be attached easily. The 1/4" thick ABS framework is easily drilled if the item you intend to attach doesn't align properly with the supplied mounting holes. For props up to 2 lbs. Unit comes unassembled with full instructions.
Comes with one of our high-torque servos. A controller is required to operate the servo.