24 Channel DMX Solid State Decoder

Decode DMX signal into solid state outputs! Trigger any low voltage device with DMX!

Various power supplies for powering solenoids and other DC devices.

This high amperage power supply can power up to 100 of our LED mini spot lights, 1 of our High Torque Prop Motors, or power our Linear Actuators.

View product

This very high amperage power supply can power up to 200 of our LED mini spot lights, run up to 3 of our High Torque Prop Motors at the same, or power our Linear Actuators.

View product

Various power supplies for powering solenoids and other DC devices.

Use power supplies without having to cut off the barrel connector! .

View product

NOTE: We do not recommend activating solenoids with this unit without the use of a diode installed between the unit and the solenoid. Directly activating solenoids with this unit will damage the device.

The solid state outputs directly supply voltage to connected devices when commanded via DMX. The voltage (12 or 24) you power the decoder with determines the voltage that will be sent to the solid state outputs. So if your devices require 12V then get a 12V power supply, or if they require 24V then get a 24V power supply. To determine the appropriate amperage of the power supply you will need to add up the requirements of each device that will be connected to the decoder and then an additional 300mA for decoder itself. Contact us if you need assistance.

Specifications