PicoBoo Plus Starter Kit
It will control them but it does not supply 24VDC power to the devices. You would need a separate 24V power supply. Click here for wiring information.
The scare sound will only play as long as the animation. Record longer animation.
The cylinder can handle about 40 pounds maximum force.
The PicoBoo and BooBox controllers can run off of a 12V battery. We recommend one with high amperage such as a car, motor cycle, or alarm system battery.
Yes, as long as the power supply is 12V DC and at least 1Amp. You can never have too many amps, but never supply more voltage!
Yes, the appropriate 12V 1Amp power supply is included with this kit.
The way to do this is to record some silence into the beginning of your audio file.
Simply connect a short jumper wire between (-) and (IN) and it will play the program continuously.
Record the sequence on the PicoBoo but wait 10 seconds before tapping record to save. That will add 10 seconds of “post delay” during which time a sensor will not be able to activate the PicoBoo.
Yes. Most reed switches are normally-closed, so depending on your application you might have to set the trigger mode on the PicoBoo to normally-closed too. Either way it will work.
Yes, you can run them from a 12V battery. More information can be found here