|Input Voltage||9-15VDC (12VDC nominal)|
|Current Draw||< 230mA @ 12VDC|
|Power Supply||for use with class 2 transformer or battery|
|Beam Angle||25-40 degrees|
|Ingress Protection||IP65 with optics guard|
|LED||Cree XLamp XP-G|
|Certifications||UL and CE|
|Power Connector||2.1mm DC jack with screw terminal adapter|
|Distance||Center Beam||Beam Width|
|1.0m (3.3ft)||510lx (47.4fc)||368lx (34.2fc)||0.4m (1.3ft)||0.6m (2.0ft)|
|2.0m (6.6ft)||123lx (11.4fc)||91lx (8.5fc)||0.9m (3.0ft)||1.3m (4.3ft)|
|3.0m (9.9ft)||53lx (4.9fc)||38lx (3.5fc)||1.3m (4.3ft)||2.2m (7.2ft)|
Q: What kind of gobos can you use with the Gantom iQ?
A: Any pattern that is cut into a 19mm (3/4”) diameter disk. Traditional gobos such as stainless steel or glass will work for permanent installations. For temporary events, inexpensive full color gobos can be made from 35mm film slides or self printed onto transparency paper. For full color film gobos visit: www.colorslide.com . It is important that you know colorslide.com will print your gobo designs but cannot cut them into the correct circular shape. For this we recommend purchasing a 19mm (3/4”) craft punch online or at a craft store. Please note that film slides will fade over time as the film is a photosensitive material. Although this process renders sharp full color images at a low price, these slides are designed for temporary use. Please consider stainless steel or glass for permanent applications.
For stainless steel or glass gobos visit: gamonline.com or rosco.com.
Q: Can I print my own patterns?
A:Yes! As long as your able to create well defined patterns onto a 3/4″ (19mm) diameter disk that is less than 0.08″ (2mm) thick, it will load easily into the Gantom iQ and can render sharp patterns. You can also use a high resolution inkjet printer to create full colored patterns onto transparency paper. However, due to the resolution of typical printers and the amount of magnification with our optics, the projected pattern will not be as sharp as a professionally made pattern. Use the following sizing information to design the images for your own custom gobos:
|Gobo Size||19mm (0.75in) Ø|
|Max Image Size (For Patterns)||15mm (0.59in) Ø|
|Max Image Size (For Text)||10mm (0.39in) Ø|
Yes, Darklight LED products are UL Listed. Please note that the "Nano" spots are not a Darklight product and are not UL Listed.