The module has one relay (10 amps max) on screw down terminal blocks. PicoBoos, BooBoxs, lights, or any other device that can be triggered from a relay can now be activated wirelessly. Use with all FrightProps controllers and audio players or your own devices with trigger input.
1 x Control Switch Board with one 10-amp relay on it
1 x Remote Control with one button
Requires a 12VDC Power Supply. If you are powering from another device (such as a PicoBoo) then you will not require one.
Operating frequency: 315MHz
Working voltage: DC12V
Operating current: 8.9Ma
Encoding type: pad
Maximum Load: 10A
Size: 40mm X 37mm X 25mm(approx)
Control size: 60x38x18mm(approx)
Actual antenna range will vary greatly depending on the installation and operating environment
All units use the same frequency and there is not a way to change that. What this means is that two units cannot be used in the same location and be triggered separately
Write Your Own Review
Are these waterproof, can it be out in the rain?
These are not waterproof and must be protected from all moisture.
What kind of battery used in the remote and can it be replaced?
The battery is a “23A” and is replaceable.
There are currently no specific videos for this product. Visit our YouTube channel for many great videos.