As low as $49.99
Triggers contact closure for controller activation. Mount this reflective photoelectric beam detector on wall, mount reflector on opposite wall, screw provided 6' cable into your prop controller or triggerable audio playback unit. When people walk by their body will trigger the controller. Requires a power supply if not used with one of our controllers.
Maximum distance between beam and reflector is 13 feet.
Note: If you will be using this product with one of our PicoBoo or BooBox controller then you do not need the optional power supply.
They can be used outdoors but they are not water proof and should be protected from any moisture.
Yes, this product can be powered between 12VDC and 30VDC
We find the the Reflective Beam Sensor is the best for this application.
Strobe lights will not interfere with the operation of the motion sensor or reflective beam sensor. They may cause unpredictable behavior from the diffused beam sensors.
It will not work reliably through a window.
Up to 15 feet
Fog will disrupt the laser beam.
Yes, it will trigger a Sprite. Yes, it does need its own 12V power supply. There is a checkbox option for that on the beam sensor product page.
Yes. The sensor triggers when the beam is broken. It is not affected by sunlight but must be protected from all moisture.