New Products from Main Website Store

Miniature LED Spotlights

Wed, 08 Sep 2010 09:58:01 +0000

These tiny spotlights are perfect for illuminating specific objects in the dark without lighting the entire room. Keep those dark rooms dark while still illuminating creepy things lurking in the shadows! The Miniature LED Spotlights require a power supply. We offer power supplies that can power up to 14 or 60 Miniature LED Spotlights.

Available in 10 different colors; Bright White (BW), Yellow (YW), Warm White (WW), Orange (OR), Bright Red (BR), Deep Red (DR), Green (GR), Aqua (AQ), Blue (BU), Ultra Violet (UV)

Comes with a 5 foot cord.

Price From:$11.00

Talking Skull Skinz

Wed, 08 Sep 2010 09:58:01 +0000

The FrightProps Talking Skull Skinz slip right onto your FrightProps Talking Skull!

Made of foam latex

Price From:$124.99

Attack Dog Bust

Wed, 08 Sep 2010 09:58:01 +0000

This prop is designed for use with a pneumatic mech to jump out from a dog house or other such scenario. As such, it does not come with hind legs or rear end.

31 long x 11 wide x 19 tall
Foam-filled latex

Price:$249.99

Tipping Barrel Prop - 3 Stack

Wed, 08 Sep 2010 09:58:01 +0000

Available with audio (comes with a picoBoo 104s controller, horn speaker, and motion sensor) and without audio (comes with a picoBoo 103s and motion sensor)

Requires air compressor and standard electric power.

Also available in a shorter 2 stack.

Price From:$1,045.00

4-Way 5-Port STC Valve with 1/4 Inch Orifices

Wed, 08 Sep 2010 09:58:01 +0000

Solenoids allow you to turn on/off air supply to pneumatic cylinders. The voltage given for each part is the voltage that will operate the solenoid. Click on the part diagram for more information. We also offer Complete Kits with all tubing and fittings if you need an entire solution. See our exhaust mufflers and silencers for use with our solenoids. The solenoids do not come with power cables. They all have flying leads (wires) for attaching to a power cable (AC) or power supply (DC). You can get AC power cables for the 110v solenoids by clicking here. You can get power supplies for the DC solenoids by clicking here.

All voltages are 2.5W

Price From:$24.26

miniFLICKER Light Controllers

Wed, 08 Sep 2010 09:58:01 +0000

miniFLICKER is a new product designed to generate the effect of flickering flames. Three versions are available, each with its own program to closely simulate candle flames, loose electrical connections, or roaring fires. All models have two channels, rated at up to 150 watts per channel. They also include an "effects" control to adjust the speed and depth of a specific effect.

SPECIFICATIONS

* Housing: Textured black flame retardant ABS with mounting flanges Size: 2.4” wide x 3.29” long (4.375” including mounting flange) x 1” deep (1.25” including control)
* Controls: Top mounted rotary effect control.
* Electrical rating: 150 Watts per channel, 300 watts total.
* Connections: Polarized AC plug and two polarized AC outlets
* Power supply: 120 volt AC, 60 Hz, 3 amp maximum.
* Circuitry: All solid state, microprocessor controlled

EFFECTS AVAILABLE

* Candle flame
* Roaring fire
* Faulty electrical connection

COMPATIBLE LIGHTS

* LED, incandescent, halogen, dimmable CFL, cold cathode

WARRANTY

* Five year limited warranty against defects in materials or workmanship.

Price From:$69.00

picoFX

Wed, 08 Sep 2010 09:58:01 +0000

Trigger Input
The picoFX has a trigger input so you can have your lighting scene play only as patrons pass through. You can also set this trigger to loop so your scene plays continuously.

Lighting Outputs
The lighting outputs can each handle 500 watts. String together five 100 watt bulbs, or use one 500 watt halogen. A pair of halogen floods and a nice thunderstorm track are a great team for the picoFX.

Unlimited Lighting Effects Need a Pepper's Ghost box? A thunder and lightning controller? A power failure simulator? No you don't, you need a picoFX! The picoFX can be easily programmed by you to mimic any lighting effect you want. Up to 36 minutes of effects can be programmed.

MP3 Audio from SD Card Good sound quality is fine if you're playing a scream or a roar and firing off a pneumatic prop. But for a thunder storm, you need great quality sound. The picoFX's MP3 decoder plays great quality sound in sync with your lighting effects. Use any sound you like, copy it to the SD card, then program the lights to follow in sync.

Real-Time Programming This is the easy part, there's one red record button and two knobs. Press the record button, your sound starts playing, then dim or brighten your lights using the knobs as you listen to the sound. Press record again to save the program then walk away, you're done. Seriously, walk away.

Comes with 2GB SD memory card for MP3 audio storage!

Click here for some great information on the Peppers Ghost Illusion

Price:$199.00

i-Zombie Moon

Wed, 08 Sep 2010 09:58:01 +0000

Few objects are as symbolic of Halloween and all things haunted as a full moon. Werewolves transform under a full moon. Witches, graveyards, vampires, castles, haunted houses, black cats, haunted forests and more are nearly always pictured with a full moon. This common Halloween symbol is not, however, very common at all. We had a full moon on Halloween back in 1955 and there was one in 2001. The next one will be in the year 2020. That is only three full moons on Halloween over a 65 year period!

The moon is perhaps the ultimate special effect for any haunt venue whether it is a large commercial haunt or a neighborhood home-haunt attraction. Even though we waited patiently for 46 years for the last Halloween full moon, we will still have to wait another 10 years for the next one. Of course, there is still the problem of getting it to hang in just the right spot in your cemetery scene… UNTIL NOW!!

The i-Zombie Moon
Few props will dress up your haunt like the glow of a full moon as it casts its eerie light over cold, gray tombstones or through the tree branches near an old haunted house. Perhaps it is seen through a window or is just the perfect addition to your outdoor scene. No matter where you display your i-Zombie Moon, it is the ﬁnishing touch that makes your scene come to life.

Like all i-Zombie products our i-Zombie Moon is built to last. We used rugged, heavy gauge ABS plastic which was specially molded to hold the 1/8 inch thick acrylic lens. Using a special printing process, the high resolution image was printed directly on the acrylic to make a permanent, photo quality image of the moon. The virtually unbreakable light source creates an even dispersal of light behind the picture to eliminate dark areas. The unit is then sealed up so that it may be used inside or outside. The moon can be hung anywhere using the two 1/4 inch eyebolts mounted in the top of the unit. The i-Zombie Moon measures a full 25-1/2 inches in diameter by 3-1/2 inches deep and weighs just under 8 pounds.

Price:$179.95

Talking Skull with Mouth and Eye Movement (includes PicoTalk Controller)

Wed, 08 Sep 2010 09:58:01 +0000

Includes Skull with mouth and eye movement servo motors and PicoTalk 2-channel controller. All you need is an audio source (such as a CD player, MP3 player, microphone, etc) and speakers.

Note: Skull has an aged look as shown in the pictures.

Price From:$310.00