LED's come pre-installed into a set of eyes. Simply remove the eyes in your Talking Skull and replace with these. Please note...
- These are only compatible with Talking Skulls manufactured since 2013. They plug directly into the PicoTalk 3 controller.
- If you want to use these eyes for another purpose (not with the Talking Skulls) you can power them from 12V DC but you need to use a 560 ohm resistor, 1/2 watt on each LED eye. See tech doc on this here.
What voltage are the LED eyes?They do not have a voltage. They require a resistor if you want to connect them to anything other than the PicoTalk controller. Use a 560 ohm resistor if you want to connect them to 12 volts, or a 220 ohm if you want to connect them to 5 volts.
Popular Talking Skull Parts & Accessories