Simply plug one of the cables into a standard 110VAC outlet and then plug your props or lights into the provided outlet. The on time is adjustable from a minimum of approximately 2 to 3 seconds. The next time is about 10 to 20 seconds, with large increments up to a high of about 10 to 15 minutes.
- Max load must not exceed 300-watts (which is about 3-amps). For reference, a standard 100-watt light bulb uses about 1-amp.
- 180 degree detection zone
- Works with our barrel poppers, haunted books, lights, and any other prop and AC devices
Does the motion sensor go off if there is a flickering light or just when a person walks by it?It detects body heat and not flashing lights.