Categories  Controllers & Electronics

 
#1195

Activating 12VDC Car lights & horns from a PicoBoo

WIRING FOR LIGHTS AND HORNS THAT REQUIRE LESS THAN 10AMPS

The wiring diagrams shown here will have your lights and horn sharing the PicoBoo's power supply.  The PicoBoo comes with a 12V 1Amp power supply which might not be enough to power everything.  For this reason we recommend that a 12V 5amp or 10amp power supply be used (amperage depends on how much current your light and horn require).  Or you can use a car battery which will have plenty of amperage to power everything (see below).

Control Lights on one output and horn on the other

 

Control Lights and horn at the same time from one output

 

 

WIRING FOR LIGHTS AND HORNS THAT REQUIRE MORE THAN 10AMPS

The wiring diagrams shown here will have your lights and horn using a car battery and high amperage relays.  The PicoBoo 12V 1Amp power supply can be used to power the PicoBoo.

Control Lights on one output and horn on the other

 

Control Lights and horn at the same time from one output

 

 

Powering a PicoBoo from the vehicles battery

Powering a PicoBoo from the vehicles battery using a cube relay

COPYRIGHT © FRIGHTPROPS, LLC. PLEASE CONTACT US IF YOU WOULD LIKE TO REPRODUCE OR REPUBLISH PORTIONS OF THIS DOCUMENT. THE USER ACKNOWLEDGES AND WARRANTS THAT IT BEARS FULL AND COMPLETE RESPONSIBILITY AND LIABILITY FOR THE FINAL DESIGN OF ANYTHING THAT INCORPORATES THE PURCHASED PRODUCTS, INCLUDING FULL AND COMPLETE RESPONSIBILITY AND LIABILITY FOR THE PROPER AND SAFE INSTALLATION, OPERATION, AND MAINTENANCE OF THESE PURCHASED PRODUCT(S).
Tags: None currently.

Related Products

Related Entries