• FaceBook
  • Twitter
  • Instagram
  • Pinterest
  • YouTube
  • Google+
  • Tumbler
  • Blog

Only 5
days until

This item may take 3-6 business days to ship.
EZ-Spray® Silicone 20 and 22

EZ-Spray® Silicone 20 and 22

SKU: 0594-EZS
EZ~Spray® Silicone 20 and 22 are sprayable silicones which cure quickly to soft rubbers with high elongation and tear strength. Liquid silicone is sprayed through the EZ~Spray® Junior Cartridge System which is an economical alternative to expensive spray equipment.

In Stock

From: $256.73

To: $972.68

Price as configured: $0.00

* Required Fields

Price as configured: $0.00


After a suitable thickness is attained, EZ~Spray® Silicone 20 cures in about 10 minutes while EZ~Spray® Silicone 22 cures in about 45 minutes. EZ~Spray® Silicone cures with negligible shrinkage to strong, durable silicone rubbers good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.

EZ~Spray® Silicone 20 and 22 silicones are effective at making fast, cost effective vacuum bags for producing composite parts. Newly sprayed or injected bags can be removed from the mold in a matter of minutes and used immediately in production with polyester or epoxy resin systems. The advantage that EZ~Spray® Silicone offers vs. conventional vacuum bagging systems is the speed at which a production-ready silicone bags can be made resulting in significant time and labor savings. Read the EZ~Spray® Junior manual prior to spraying.

Yield - Each cartridge contains 3.75 lbs. (1.7 kgs) of material. Assuming a thickness of 3/8 inches (0.95 cm), one cartridge of EZ~Spray® Silicone 20 will cover approximately 1.66 sq. ft. (0.15 square meters).

Advantages of Silicone Vacuum Bags:

  • Fast – as low as 4 hours from bag fabrication to part production.
  • Cost Effective Production after 8 cycles vs. consumable bags.
  • Reusable for hundreds of parts with polyester-based resins; upto 50 times with epoxy and 100 times when using pre-preg thermoplastic. Also suitable for de-bulk.
  • Reduce Labor – silicone bag is reset in minutes; no taping or pleating.
  • Self-Releasing – no release agents required.
  • Perfect Fit even for complex shapes and undercuts.
  • Odorless – No solvents or VOC's.
  • High Service Temperature – up to 464°F / 240°C.
  • Built-in Vacuum Seal.
  • Ideal for Wet Lay-Up, Infusion, Pre-Preg (in or out of autoclave), and De-Bulk.



Technical Bulletin


Product Faqs

Ask a Question

There are currently no FAQs for this product
Please visit our Support & Training Center for support information.