PicoBoo Plus Starter Kit + Pneumatic Hookup Kit + Cylinder of your choice!
PicoBoo Plus Starter Kit
- 1x PicoBoo Plus Four Output Controller
- 1x Speaker with 15 feet of wire
- 1x Audio Recording Cable
- 1x Optional choice of trigger with 15 feet of wire
- 1x Solenoid Valve (5-Ported 4-Way 12VDC with 1/8" ports)
- 2x Elbow Fittings (1/8" Threads x 1/4" Airline)
- 3x Male Fittings (1/8" Threads x 1/4" Airline)
- 2x Exhaust Mufflers (1/8" Threads)
- 20 feet of 1/4" Airline
- This determines how far the shaft extends. Some of the most popular stoke sizes are 2, 6, and 12.
Will this controller run servos?
Can I use a 12V DC 10 Amp power supply with this controller?Yes, as long as the power supply is 12V DC and at least 1Amp. You can never have too many amps, but never supply more voltage!
Will the PicoBoo control and power 24V DC devices?It will control them but it does not supply 24VDC power to the devices. You would need a separate 24V power supply. Click here for wiring information.
Scare sound only plays for 2 secondsThe scare sound will only play as long as the animation. Record longer animation.
What is the max pneumatic weight for the PicoBoo Plus Controller + Pneumatic Kit?The cylinder can handle about 40 pounds maximum force.
Can these be battery powered?The PicoBoo and BooBox controllers can run off of a 12V battery. We recommend one with high amperage such as a car, motor cycle, or alarm system battery.
Is the PicoBoo power supply included?Yes, the appropriate 12V 1Amp power supply is included with this kit.
Is there a way to delay the sound starting, say for a few seconds, once the trigger is activated?The way to do this is to record some silence into the beginning of your audio file.
I would like to have a 10 second pause between triggered events.Record the sequence on the PicoBoo but wait 10 seconds before tapping record to save. That will add 10 seconds of “post delay” during which time a sensor will not be able to activate the PicoBoo.
How do I make it continuously play without having to trigger it?Simply put a jumper (piece of wire) into the trigger input terminals and it will play the program continuously.
Can a reed switch be used as a trigger?Yes. Most reed switches are normally-closed, so depending on your application you might have to set the trigger mode on the PicoBoo to normally-closed too. Either way it will work.
Can I record audio into the controllers via my Android or iPhone?Yes.
Can I run a PicoBoo from a battery?Yes, you can run them from a 12V battery. More information can be found here
Popular Pneumatic Hook-Up Kits
- Air Powered Props
- Air Powered Kits & Mechs
- Air Powered Noise Makers
- Electric Powered Props
- Electric Firecrackers
- Firecracker Props
- Spark Props
- Shock Mats
- Talking Skulls
- Water Sprayers
- Motion Platforms
- Fearful Floors
- Lighting Effects Props
- Vibration Effects
- Vibrating Floors
- Flame Effects
- Zombie Paintball
- Stretch FX
- Escape Rooms
- See More!
- Pneumatic Cylinders
- Pneumatic Cylinder Parts
- Solenoid Valves
- Pneumatic Kits
- Airline for Push-In Fittings
- Regulators, Line Filters & Lubricators
- Air Bags and Accessories
- Compressor Air Line & Fittings
- Air Accumulators
- Quick Exhaust Valves, Check Valves, Flow Controls
- Mufflers & Silencers
- Vortex Air Amplifiers
- Pneumatic Vibrators
- Pneumatic Posters
- C02 Air Systems
Controllers & Electronics
- Prop Controllers
- Triggers for Prop Controllers
- Video Controllers
- Motor & Linear Actuator Controllers
- LED Light Controllers
- AC Light Controllers
- Remote Control
- Power Cables and Transformers
- Hookup Wire
- Mobile Power Packs
- Self Contained Motion Sensor with Timer
- Simple Timers
- Electronic Components
- Panel Mount Lights & Buttons
- Elevator Parts
- Memory Cards & Readers
- Shrink Tubing
- Electric Motors
- Video Effects
- Escape Rooms
- Sound & Audio
- Fog, Bubbles, Snow
- Scents & Smells
- Costumes & Masks