Product Description
Audio
The PicoBoo uses a built-in flash memory sound chip which makes it easy to playback and record up to 2 minutes of sound. Hook up any audio device to the PicoBoo's audio-in and record the desired sound straight into the chip. No computers, no drivers, no converting sound formats. Up to 8 scare sounds can now be recorded. The PicoBoo will automatically increment through them with each scare.
Amplifier
The PicoBoo includes a class D amplifier, just connect a speaker and you're ready to rock. For those with larger sound requirements, there's also a line-level output.
Real-Time Programming
All programming of outputs and sounds are done in real-time using the programming section on the PicoBoo. Like all other BooBoxes you can create an elaborate scene synchronized with sound by simply pushing some buttons.
Write-Protection
Just like their BooBox brothers, the PicoBoos have a write protection mechanism that helps prevent accidental or unwanted program changes.
Relay Outputs
The PicoBoos has two 10 amp relay outputs brought out to a pluggable terminal block. Each of the outputs has both a normally-open and normally-closed contact, ensuring you will be able to control anything. Up to 2 minutes of animation at 30 frames per second can be recorded.
Trigger Input
The PicoBoos have one input which can be used with normally-open or normally-closed contacts, making it possible to work with nearly any type of trigger. Connecting the trigger to ground will loop the scare indefinitely. New this year, the trigger connector has been moved to the back and is now pluggable to make installation even easier.
Ambient and Scare Modes
While the PicoBoos are not scaring, they are by default in ambient mode. Program the sound chip of the PicoBoo with what you want the patrons to hear as they approach the scare, a little foreshadowing of the terror to come. Only audio can be programmed in ambient mode.
Accessories that work with the PicoBoos...
Click here!
Note: The PicoBoo comes with the required AC power pack to power it.
Product Documentation
Control a 12vDC Motor from a PicoBoo
Activate a fog machine from a PicoBoo
Activate a BooTunes from a PicoBoo
Control a Linear Actuator from a PicoBoo
Powering DC Solenoids from a PicoBoo
Activating PicoBoos from live voltages
All Electronic Support Documents
Additional Information
| Included Power Source | 12v DC 1amp : Barrel Plug |
|---|
Videos
PicoBoo 104 WalkthroughPicoBoo 105 OverviewPicoBoo 103 and 104 OverviewYou may also be interested in the following product(s)
Water Misters (Pneumatic)As low as: $75.01 |
Spray System (Pneumatic)As low as: $241.02 |

